High-performance 15kg–120kg automated washer-extractors, reversing axial-airflow tumble dryers, NABH hygienic hospital barrier units, and bed linen flatwork ironers. Factory-direct manufacturing in Ambala Cantt.
Manufactured with surgical stainless steel, low water-to-linen ratios, and heavy pneumatic valves designed for 24/7 continuous operation.
15kg – 120kg RANGE
380G EXTRACTION
Equipped with pneumatic air-ride suspension and high-frequency variable speed drives. Extracts up to 380G to drop linen residual moisture down to 45%, cutting tumble drying fuel drastically.
15kg – 100kg BATCH
STEAM / GAS / ELEC
Features reversing basket cylinder rotation that stops linen roping and bundling. Heavy-duty axial draft suction draws heated air directly across fabrics for uniform drying without thermal loss.
NABH BIO-BARRIER
PASS-THROUGH
Designed for hospital cleanrooms and OT sterile linens. Directly embedded within a physical dividing wall with dual interlocked doors to prevent soiled cross-contamination.
1.6M TO 3.2M WIDTH
MIRROR CHEST
High-productivity roller calender for bed sheets, duvet covers, pillowcases, and table damasks. Mirror-polished heated chest gives crisp hotel linen presentation with minimal friction.
15kg, 25kg, 50kg
1400 RPM SPIN
Heavy 3-point spring suspension self-compensating base eliminates vibrations. Features high-tensile stainless steel inner basket with rapid mechanical brake engagement.
TEXTILE MILL GRADE
DIGITAL COUNTER
Standard for garment export manufacturing units and fabric dying mills. Features dual illumination (overhead top hood & translucent glass backlights) with accurate length counters.
Calculate your facility's daily linen load in kilograms, determine required hourly washing capacity, and generate an engineered CLS equipment battery.
Physical dimensions, power consumption, drum volumes, and extraction G-force ratings for mechanical design engineers and plant architects.
| Model Code | Dry Capacity | Drum Size (Dia × L mm) | Spin / G-Force | Motor Power | Steam Inlet | Drain Port | Machine Dims (W×D×H mm) |
|---|---|---|---|---|---|---|---|
| CLS-WE-15 | 15 kg (33 lbs) | 650 × 450 | 350 G (980 RPM) | 2.2 kW / 3 HP | 1/2" BSP | 2.5" Gravity | 920 × 980 × 1420 |
| CLS-WE-30 | 30 kg (66 lbs) | 800 × 600 | 380 G (900 RPM) | 4.0 kW / 5.5 HP | 3/4" BSP | 3.0" Gravity | 1180 × 1240 × 1680 |
| CLS-WE-60 | 60 kg (132 lbs) | 1050 × 700 | 380 G (820 RPM) | 7.5 kW / 10 HP | 1" BSP | 3.5" Gravity | 1480 × 1520 × 1880 |
| CLS-WE-100 | 100 kg (220 lbs) | 1250 × 850 | 380 G (740 RPM) | 11.0 kW / 15 HP | 1.25" BSP | 4.0" Gravity | 1780 × 1820 × 2120 |
| CLS-TD-30 (Dryer) | 30 kg Dry | 900 × 800 | Reversing Axial | 1.5 kW (Fan 1.1kW) | 35 kg/hr | Exhaust Ø 200mm | 1020 × 1300 × 1800 |
| CLS-TD-60 (Dryer) | 60 kg Dry | 1200 × 950 | Reversing Axial | 2.2 kW (Fan 1.5kW) | 70 kg/hr | Exhaust Ø 250mm | 1350 × 1600 × 2050 |
End-to-end plant design covering civil foundations, steam header loops, water treatment, electrical panels, and on-site staff training.
Designed for luxury percale bed linens, heavy terry towels, and banquet damasks with high whiteness retention.
Strict wall-partitioned bio-barrier systems preventing cross-contamination between soiled OT linen intake and sanitized patient wards.
Turnkey plants for retail chains, central processing facilities, and garment dry cleaners with automated steam finishing.
Standard rigid-mount washers only reach 100G to 150G extraction, leaving up to 75% moisture in linens. Central Laundry Systems high-spin machines extract at 350G–380G, lowering residual moisture below 48%. This cuts tumbler dryer cycle times nearly in half, reducing steam and electricity costs.
A standard industrial setup requires 3-Phase 415V AC electricity, a softened water supply (under 50 ppm hardness to prevent boiler scaling and fabric greying), adequate steam or gas pressure, and high-volume gravity drain channels.
Yes. Our manufacturing and dispatch plant in Ambala Cantt maintains extensive stock of mechanical seals, bearings, VFD controllers, solenoids, and pneumatic valves with PAN-India dispatch and on-site field engineers.